Holding tanks · marine sanitation

Black water tank sensor — with nothing in the tank

The only thing worse than a full holding tank is not knowing it’s full. Gobius measures black water from the outside of the tank — no probe to foul, no hole to smell, no guesswork.

  • Tank stays sealed
  • Alarm before full
  • Zero maintenance
SEALEDHIGHHIGH

The problem

Why holding tank indicators always fail

Every conventional black water sender shares one flaw: it lives inside the tank.

Internal senders foul

Floats jam and capacitive probes coat over within a season. The gauge reads “half full” forever — until the tank overflows.

Fittings smell and leak

Every hole in a holding tank is a permeation path. The fewer penetrations, the fresher the boat.

Three LEDs tell you nothing

“Empty – half – full” is not information when you’re deciding whether to head for the pump-out station today or Friday.

The Gobius way

Measured through the wall instead

Pick by tank material — both options mount externally in about 15 minutes.

Gobius C, Basic, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Details

Gobius C, NMEA 2000, 0-100%

Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Details

Sensor tape kit, Gobius and Gobius Pro

Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Details

Gobius C, all analog outputs, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Details

Gobius Pro with 1 sensor

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 2 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 3 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius 4 for grey, black & waste tanks

Complete tank monitor system for grey, black and waste tanks, version 5.0.

Details

Gobius 4 for water/fuel- & fluid tanks

Complete tank monitor system for water, fuel and other fluids.

Details

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks

For waste tanks

Details

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks

For water/fuel- & fluid tanks, version 5.0.

Details

Gobius panel cable, 1,5 m

Used to connect the panel to the Control unit.

Details

New Control unit for Gobius 1 and 4 for grey, black & waste tanks

Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Details

Upgrade your old Gobius to version 5.0

Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

Details

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks

Control unit for water/fuel- & fluid tanks, version 5.0.

Details

NMEA 2000 Converter

Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Details

Gobius panel (PIR)

Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Details

Gobius panel for grey, black & waste tanks

For Gobius 1 and 4, grey, black & waste tanks.

Details

Gobius panel for water/fuel- and fluid tanks

For Gobius 1 and 4, for water/fuel- and fluid tanks.

Details

Hub for Gobius Pro sensors

Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Details

Audible alarm, buzzer

Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.

Details

Plastic or GRP tank → Gobius C reads 0–100 % steplessly, straight through the wall.

Stainless or aluminium tank → Gobius Pro measures through metal; one sensor at 75 % is the classic setup.

Recommended setup

The pump-out planner

  1. 01

    One sensor at “time to plan”

    Gobius Pro at 75 % height, or Gobius C with an alarm at 75 % — your early warning, days before it matters.

  2. 02

    Alarm at “now”

    Second alarm at 95 %. Gobius Pro can light a lamp at the helm via its relay output — impossible to miss.

  3. 03

    On your screens

    With Gobius C, add NMEA 2000 and the correct volume shows on your chartplotter and Victron GX next to battery and water.

Regulations

Sealed is also the law

In Sweden and much of the Baltic Sea, discharging black water near the coast is banned — holding tanks are mandatory equipment, and pump-out planning is part of every cruise.

A sealed tank with an external sensor keeps the system exactly as the builder certified it: no new penetrations below deck, no modified fittings, no re-certification questions.

That’s why Gobius is the retrofit chosen by boatyards: the measurement changes, the tank doesn’t.

Sailing boat heeling under full sail with Swedish flag
Heeling 25° — the reading stays calm
A boat lying at anchor in a sheltered bay
A weekend at anchor — alarm set at 75 %

Owners

From boats with waste holding tanks

“Fitted the Pro at 75 % on the waste tank. The night it first warned us, we were two days from an overflow we’d have never seen coming.”

Charter skipper · Stockholm archipelago

“No more tapping the tank with a screwdriver. The app just says 64 %.”

J. Nilsson · Najad 360

“We installed Gobius across the fleet — zero maintenance in three seasons.”

Fleet manager · Charter company, Croatia

Questions

Black water sensors — frequently asked

How do I know when my black water tank is full?

Mount a Gobius sensor on the outside of the tank and it tells you — in the app, on your chartplotter, or with an alarm before the tank is full. No more knocking on the tank or unpleasant surprises at sea.

Why not use a normal level sender in a black water tank?

Because anything inside a holding tank fouls. Floats stick, capacitive probes coat over, and every through-fitting is a future smell or leak. An external sensor has nothing in the tank — it cannot foul and the tank stays 100 % sealed.

Does it work on my tank — plastic, GRP or steel?

Yes. For plastic (polythelene) and GRP holding tanks, Gobius C gives a stepless 0–100 % readout through the wall. For stainless or aluminium tanks, Gobius Pro measures through metal — still from the outside.

Can it warn me before the tank is full?

Yes — both sensors have configurable alarms. A common setup is a warning at 75 % so you have time to plan a pump-out, plus a “full” alarm. Gobius C and Pro can even switch a lamp or buzzer directly via their outputs.

Does it show black water tanks too?

Yes, the same sensors handle also grey water, fresh water and fuel. Many owners fit one sensor per tank and see all of them in the same app view, or with Gobius C on the same NMEA 2000 display.

Never guess the waste holding tank again

External sensor, sealed tank, alarm before full. Installed in 15 minutes.