Where you’ll use it
Every tank — on water, on the road, on site
Wherever there’s a tank to monitor, Gobius reads the volume and level from the outside—no hole, nothing inside the tank. Start from your situation.
- Reads from outside the tank
- Water, fuel, grey and black water
- Retrofits in about 15 minutes

Same idea everywhere
One sensor family, every kind of tank
The situation changes. The method doesn’t: the sensor sits outside the tank and reads volume and level through the wall.
Nothing inside the tank
No float, no probe, no sender in the liquid — so there is nothing to foul, corrode or jam, whether the tank holds drinking water or waste.
No hole to drill
The tank stays sealed. That matters just as much on a hull below the waterline as it does on a buried waste tank you can’t dig up again.
Retrofits in minutes
Fits the tanks you already have — about 15 minutes per sensor, with no need to drain, cut or take anything out of service.
Not sure which sensor?
It comes down to your tank
Most people want Gobius C — the exact volume, steplessly 0-100%. Choose Gobius Pro when the tank has to be read from the side, or when alarm points are all you need.
Polyethelene or fibreglass tank
Gobius C reads straight through the wall from the top and gives you a true 0–100 %. Nothing is drilled at all.
Metal tank, or side access only
Gobius Pro mounts on the side of any tank — steel, stainless, aluminium or plastic — and alarms at the levels you choose.
Some boats and motorhomes use both: Gobius C on the water and fuel tanks to know the exact volume; Gobius Pro on a metal or awkward waste tank, which they do not want to overfill. Compare Gobius C and Pro →
Find the setup for your tanks
Tell us what you’re measuring and we’ll point you at the right sensor — or order today and fit it this weekend.





