Comparison · updated June 2026

Gobius vs SeeLevel — what’s actually different?

Garnet’s SeeLevel II is the best-known external tank monitor in North America, and a fair benchmark. Here is where the systems agree, where they differ, and which to pick for your tanks.

FeatureGobiusSeeLevel II (709-series)
MountingExternal — glue/tapeExternal — adhesive strip
Polythelen / GRP tanksC: 0-100%, stepless · Pro: level switch · Original: 4 levelsCapacitive strip
Metal tanks (steel/alu)Gobius Pro and Original — through the wall✕ No
ReadoutStepless, 0–100 % (C) · points (Pro and Original)Percent steps on a panel
Where you read itPhone app (both) · chartplotter/MFD and Victron GX (C)Dedicated wall panel (BT on some models)
NMEA 2000Native (C) or gateway (Pro & Original)✕ No
Alarms & outputs2 alarmsPanel alarm
Tank height/shapeUp to 4,5 m, volume-mapped calibrationStrip length limits; flat vertical run needed
Origin & focusSweden · marine + RVCanada & USA · RV

We’ve kept this factual — SeeLevel specs summarised from public documentation, June 2026. Spot an error? Tell us and we’ll fix it.

Choose SeeLevel if…

  • You want the classic North-American RV setup with a hard-wired wall panel.
  • Your tanks are plastic, with a clean vertical wall for the strip.
  • Your installer already stocks and knows the system.

Choose Gobius if…

  • Any of your tanks are metal — that decides it on its own (Gobius Pro or Original).
  • You want a true stepless volume and percentage on your odd tank.
  • You want volumes on your phone — and on your gauge or, on your chartplotter or Victron Cerbo GX — rather than a separate panel.
  • You want the levels to do something: trigger alarms, a lamp, a buzzer, or a pumpout.

The Gobius lineup

If the table tipped you our way

Gobius C, Basic, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Details

Gobius C, NMEA 2000, 0-100%

Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Details

Sensor tape kit, Gobius and Gobius Pro

Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Details

Gobius C, all analog outputs, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Details

Gobius Pro with 1 sensor

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 2 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 3 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius 4 for grey, black & waste tanks

Complete tank monitor system for grey, black and waste tanks, version 5.0.

Details

Gobius 4 for water/fuel- & fluid tanks

Complete tank monitor system for water, fuel and other fluids.

Details

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks

For waste tanks

Details

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks

For water/fuel- & fluid tanks, version 5.0.

Details

Gobius panel cable, 1,5 m

Used to connect the panel to the Control unit.

Details

New Control unit for Gobius 1 and 4 for grey, black & waste tanks

Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Details

Upgrade your old Gobius to version 5.0

Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

Details

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks

Control unit for water/fuel- & fluid tanks, version 5.0.

Details

NMEA 2000 Converter

Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Details

Gobius panel (PIR)

Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Details

Gobius panel for grey, black & waste tanks

For Gobius 1 and 4, grey, black & waste tanks.

Details

Gobius panel for water/fuel- and fluid tanks

For Gobius 1 and 4, for water/fuel- and fluid tanks.

Details

Hub for Gobius Pro sensors

Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Details

Audible alarm, buzzer

Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.

Details

Questions

Gobius vs SeeLevel — frequently asked

Is SeeLevel external too?

Yes — SeeLevel’s sender strips also mount on the outside of a polyethylene tank, which is why people often compare the two brands. The main differences are tank material (Gobius Pro and Original use metal), readout style, and how the data reaches you (app/NMEA 2000 vs. dedicated panel).

Which is better for a metal tank?

Gobius Pro and Original — capacitive strips like SeeLevel’s can't read through conductive walls, so metal tanks are outside their spec. Gobius vibration method measures through stainless steel and aluminum. Gobius C works on a metal tank with a hole and an adapter.

Which is better for an RV?

Both work well on polyethylene RV tanks. SeeLevel is a classic in North American RVs with its panel display; Gobius C counters with an app readout, stepless reading the volume and %, 2 alarms, NMEA 2000 support and Bluetooth communication with Victron Cerbo GX and also with Roam Hub from Roam Devices.

Can I replace a SeeLevel system with Gobius?

Yes — both being external, swapping is non-destructive: clean the wall, mount Gobius, calibrate in the app. Nothing in the tank needs touching, and the old strips can stay or go.

Ready to see your real volume in your tanks?

Find your nearest dealer, or contact us and we will help you choose. Installation takes about 15 minutes.