Formerly Gobius 4 · four levels on a panel

Gobius Original — the tank monitor that started it all

Three sensors glue to the outside wall and a small LED panel shows four levels. Nothing drilled, nothing inside, and no phone needed: you just look at the panel.

Two versions: one for grey, black and waste tanks, one for water, fuel and other fluids.

  • Steel and plastic tanks
  • 100 % external
  • No app needed
SEALEDLEVEL

In short

Four levels on a panel, read through any tank wall

Any material, any shape

Stainless <3 mm, steel <3 mm, aluminum <5 mm, plastic <12 mm, GRP <8 mm. Each sensor reads its own spot on the wall, so the tank shape does not matter.

Three sensors, four levels

Each sensor watches one fixed height. Together, they give the panel four steps, not a stepless percentage.

Nothing to pair

No phone, no app, no Bluetooth. The LED panel sits where you want it and shows the level the moment you look.

Installation

Glue, connect, press once

About 30 minutes, and not a single hole.

  1. 01

    Glue the three sensors on

    Clean the spots with the 3M cleaner and press each sensor to the outside wall, one at each height you want to know about.

  2. 02

    Connect panel and power

    Plug the sensors and the LED panel into the control unit and connect it to 12 or 24 V DC.

  3. 03

    Calibrate with one press

    Press the button once and the system learns your tank. Maintenance-free from there.

Gobius logo graphic with wireless signal waves, person icon, and four colored indicator lightsGobiUS wireless control graphic with an ON/OFF button and four colored status lights
The LED panel: grey for waste tanks, black for water and fuel

Two versions

Choose your Gobius Original

Same sensors but two different panels. The difference is which levels the panel shows, set for the liquid in your tank.

Gobius 4 for grey, black & waste tanks

Complete tank monitor system for grey, black and waste tanks, version 5.0.

Details

Gobius 4 for water/fuel- & fluid tanks

Complete tank monitor system for water, fuel and other fluids.

Details

Specifications

Gobius Original at a glance

MeasurementPatented vibration analysis (“knock and listen”) — three sensors, one level each
DisplayLED panel, 60 × 60 mm — four levels, no app needed
Levels shownFor waste tanks: empty · ¼ · ½ · ¾ full — For water/fuel tanks: empty · ⅓ · ⅔ · full
Tank materialsStainless steel <3 mm · steel <3 mm · aluminium <5 mm · polyethylene <12 mm · fibre glass <8 mm
LiquidsWaste version: grey & black water — Water/fuel version: fresh water, diesel, petrol and other fluids
MountingGlued with 3M VHB tape to the outside of the tank wall — nothing inside. You can mount the sensors on different sides of the tank..
Power12–24 V DC
FuseRequired, user-supplied: fast acting (F), 500 mA, 250 V
In the boxLED panel, Control unit, 3 sensors (1 m cable), Panel cable 1.5 m, DC cable 1.8 m, 3M surface cleaner, Spare sensor tape, Velcro strap and Instructions (Eng & Swe).
InstallationAbout 30 minutes — calibrated with one press of a button
Outputs0-190 / 240-33 Ohm, 4-20 mA, 0-5 Volt, 1 On/off alarm

Protect it with a fuse

To prevent damage to the sensor and potential hazards to personnel, the sensor and all connected external equipment (gauges, lamps, etc.) must be protected by a user-supplied fuse compliant with the following specification:

• Type: Fast acting (F)
• Current rating: 500 mA
• Voltage rating: 250 V

Questions

Gobius Original — frequently asked

Which Gobius Original do I need?

For waste tanks if the tank holds grey or black water. The panel shows empty, ¼, ½ and ¾ full, so you know in good time before it is full.

For water/fuel tanks if it holds fresh water, diesel, petrol or another fluid. The panel shows empty, ⅓, ⅔ and full, and turns red when it is time to fill up.

What is the difference between Gobius Original and Gobius Pro?

Both read the level through the tank wall with the same vibration method. The difference is how you read it:

Gobius Original (formerly Gobius 4): four levels on a wired LED panel. No app, no Bluetooth.

Gobius Pro: the level in the Gobius app, outputs for a lamp, buzzer or pump, and as many level points as you want.

My old Gobius 4 — is it still supported?

Yes. Gobius 4 lives on as Gobius Original: same patented method, new name, one version for waste tanks and one for water and fuel. We still support earlier generations, and you can register them as an older Gobius model.

Want the level in your phone instead of on a panel? Then Gobius Pro or Gobius C is the step up, and it can reuse your mounting positions.

Four levels you can read at a glance

Gobius Original retrofits to the tank you already have: three sensors on the outside, one panel, no holes.