Comparison · updated November 2026

Gobius vs KUS, Wema level senders

Most boats, motorhomes and trucks still have a level sender in the tank and a needle on the dashboard. Here is what they can’t tell you, and what Gobius does instead.

Side by side

Outside the tank, or inside

Gobius C sits on top of the tank and measures through the tank wall using radar technology. Nothing goes inside.

A float sender goes through a hole in the tank and hangs in the liquid. A float slides up and down a rod, moving the needle on an analog gauge.

A Gobius C sensor mounted on top of a plastic tankIllustration of a tubular float sender with a black float on a stainless rod, wired to an analog gauge with a needle between E and F
Gobius C on the tank, and a KUS, Wema sender with its gauge
FeatureGobius CKUS, Wema sender and a gauge
Where it sitsOutside the tankInside, in the liquid
Hole in the tankNone on polyethelene or GRP tanks, (a small hole on metal tanks)Always, with a flange and gasket
ReadingStepless 0-100%, resolution 2 mmIn steps
What you see0–100% correct volumes in the app or on your gauge; true volume with the Tank CalculatorA needle from E to F
Tank shapeTrue volume for any shape, with the Tank CalculatorHeight only (assuming rectangular tanks)
Waste tanksNothing to foul or cleanNeeds a protective tube and often cleaning

Float senders vary by make. Spot an error? Tell us.

The tank shape problem

Half on the gauge is not half the tank

A float sender measures height, and the gauge spreads it evenly from E to F. In a tank that is wider at the top, the needle can show half when only a third of the volume remains.

Gobius C measures the liquid with a resolution of 2 mm. For a non-rectangular tank, the Tank Calculator converts levels into the true volume in liters or gallons.

E F GAUGE
A float sender follows liquid height; the tank shape means the gauge can show half when only a third of the volume remains.

Inside the tank

Holes, steps and cleaning

Every float sender needs a hole in the tank and a flange with a gasket, in plastic and metal tanks alike: one more seal that can leak or smell.

Few owners know whether the rod reaches the bottom of the tank, or how the reading behaves close to full.

Waste versions sit inside a perforated tube that keeps paper and excrement away from the float, and the tube comes off for cleaning. Gobius measures from outside, so there is nothing to clean.

Illustration of two float senders: a stainless rod with a black float for fuel and water, and the waste version inside a perforated protective tube
A float sender for fuel and water, and the waste version in its tube

Sensors

Replace the float, keep the gauge

Gobius C with analog outputs can drive the gauge you already have. Gobius Pro is a fixed-level switch that can trigger a lamp, buzzer or pump.

Gobius C, Basic, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Details

Gobius C, NMEA 2000, 0-100%

Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Details

Sensor tape kit, Gobius and Gobius Pro

Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Details

Gobius C, all analog outputs, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Details

Gobius Pro with 1 sensor

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 2 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 3 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius 4 for grey, black & waste tanks

Complete tank monitor system for grey, black and waste tanks, version 5.0.

Details

Gobius 4 for water/fuel- & fluid tanks

Complete tank monitor system for water, fuel and other fluids.

Details

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks

For waste tanks

Details

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks

For water/fuel- & fluid tanks, version 5.0.

Details

Gobius panel cable, 1,5 m

Used to connect the panel to the Control unit.

Details

New Control unit for Gobius 1 and 4 for grey, black & waste tanks

Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Details

Upgrade your old Gobius to version 5.0

Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

Details

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks

Control unit for water/fuel- & fluid tanks, version 5.0.

Details

NMEA 2000 Converter

Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Details

Gobius panel (PIR)

Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Details

Gobius panel for grey, black & waste tanks

For Gobius 1 and 4, grey, black & waste tanks.

Details

Gobius panel for water/fuel- and fluid tanks

For Gobius 1 and 4, for water/fuel- and fluid tanks.

Details

Hub for Gobius Pro sensors

Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Details

Audible alarm, buzzer

Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.

Details

Questions

Float senders: frequently asked

What is a float sender?

A sender that sits inside the tank: a float that rises and falls with the liquid on a rod or an arm. As the float moves, the sender's resistance changes, and a gauge on the panel turns it into a needle position between empty and full.

How accurate is a float sender?

Good enough for a rough idea in a box-shaped tank. A tubular sender reads in steps, the gauge shows no litres or percentage, and it shows the height of the liquid rather than the volume, so in a tapered or hull-shaped tank the needle and the real contents part ways. Floats and switches in the liquid can also stick or foul over time.

Do I need to drill a hole for Gobius, like for a float sender?

Not on polyethylene or fiberglass: Gobius C reads through the tank top from the outside, through up to 12 mm of polyethylene or 8 mm of fiberglass. On a metal tank, it reads through a small hole with an adapter on the tank top. Gobius Pro and Original glue to the outside of any tank wall, including metal, with nothing drilled.

Why does my waste tank gauge get stuck?

Because the sender sits in the waste tank. paper and excrement build up on the float and its tube, and the reading sticks, often at full or at one fixed level. Cleaning helps for a while. A Gobius sensor on the outside of the tank has nothing to foul.

See what is really in the tank

Gobius measures from outside the tank. Keep the gauge you already have, or use the app to see the volume—and, with the Tank Calculator, you get the true volume.