Technology comparison
Radar vs ultrasonic tank sensors
Both bounce a signal off the liquid surface and time the echo. The physics underneath decides which one you want on a boat or RV tank — and it isn’t close.
| Feature | Radar (Gobius C) | Ultrasonic |
|---|---|---|
| Signal | Electromagnetic, GHz | Sound, ~40–70 kHz |
| Through plastic/GRP wall | Yes — mounts outside | ✕ No |
| Condensation on sensor | Unaffected | Blocks or scatters sound |
| Foam / vapour | Largely unaffected | Absorbs the echo |
| Temperature swings | ✕ No problem | Speed of sound drifts ~0.6 m/s per °C |
| Dead zone below sensor | 40 mm | Often 200–300 mm unusable |
| Resolution | 2 mm | ±10–20 mm typical |
| Power use | Very low | Low |
| Metal tanks | Needs opening/adapter | Needs opening |
In plain terms
Why radar wins on small tanks
Ultrasound is a fine technology — in big, calm, open silos. A boat or RV tank is the opposite: small, sloshing, full of vapour, with the sensor centimetres from the surface. Every one of those conditions hurts sound and leaves radar untouched.
The decisive trick is the wall. Polyethylene and fiberglass are transparent to radar, so a radar sensor can sit on the outside of the tank and still see the surface perfectly. An ultrasonic sensor must look at the liquid directly — which on a closed tank means cutting a hole. On a black water tank, that’s a hole you’ll smell.
That’s why Gobius C is radar: outside mounting, millimeter accuracy, indifferent to condensation and temperature — exactly the qualities a small tank demands. And when the tank is metal, where neither signal passes, Gobius Pro switches physics entirely and measures the wall’s vibration instead.
Questions
Radar vs ultrasonic — frequently asked
Is radar safe?
Yes — micro radar like Gobius C transmits at a tiny fraction of a phone’s power. The advantage on small tanks is precision: 2 mm regardless of temperature, vapour or condensation.
Why does ultrasonic struggle in tanks?
Ultrasound needs clean air to travel through. Inside a tank you get condensation on the transducer, foam on the liquid, vapour layers and a blind “dead zone” right under the sensor — all of which bend or absorb sound. Radar at GHz frequencies simply isn’t bothered by any of it.
Which one reads through the tank wall?
Radar — through non-conductive walls like polyethylene and GRP. That’s what lets Gobius C mount on the outside. Ultrasonic level sensors must see the liquid surface directly, so they need a hole (or to sit inside the tank).
And what about metal tanks?
Neither radar nor ultrasound passes through metal. For steel, stainless or aluminium tanks the external answer is vibration measurement — Gobius Pro. But if you have a hole or can do it, you can use Gobius C on metal tanks.
Ready to see the correct volume in your tank?
Order directly from us or find your nearest dealer. Installation takes about 15 minutes.