Comparison · updated November 2026
Gobius C vs Mopeka Pro: what is actually different?
Mopeka's Pro sensors measure with ultrasound, either from under the tank bottom (Pro Check Universal) or from the tank top (Pro200), and show the level in a phone app. Gobius C measures with radar through the tank top. Here is where they differ, and which to pick for your tanks.
| Feature | Gobius C | Mopeka Pro Check Universal / Pro200 |
|---|---|---|
| Methods | Micro radar, pulsation | Ultrasound |
| Fluids | Fresh Water, Diesel, Gasoline, Grey and Black Water, Oil, and all other fluids | Pro Check Universal: fresh and grey water, diesel, oil, LPG. Not black water. Pro200: non-pressurised liquids |
| Mounting | Glued to the tank top | Pro Check Universal: under the tank bottom (magnets or collar, with coupling grease). Pro200: on the tank top, screws or tape |
| Tank depth | 200–4500 mm | Pro Check Universal: tanks up to 250 US gal (about 950 l). Pro200: up to 48 in (about 1200 mm) |
| Accuracy | 5 mm | Pro Check Universal: 99.5% (Mopeka's figure). Pro200: not stated |
| Resolution | 2 mm | Pro200: 0.01 in. Pro Check Universal: not stated |
| Radar Blind Distance | 0 mm | Not applicable (ultrasound) |
| Plastic and GRP tanks | Polyethylene <12 mm and fibreglass <8 mm | Plastic and poly. Not fibreglass (Pro Check Universal) |
| Metal tanks | A hole (1 1/4") is required, along with a flang and our adapter has a conical underside. Material: HDPE. | Steel (magnets) and aluminium (collar), from below |
| Analog outputs | Basic: 0–190 / 240–33 Ω. Analog: also 4–20 mA and 0–5 V. A separate NMEA 2000 version | Bluetooth to the app. Pro200 hardwired version also has a wired output (type not stated) |
| Alarms | 2 alarm outputs, On/Of-signals, under or above | Alarms in the app. No alarm outputs stated |
| App name | Gobius | Tank Check (Co-Pilot in North America) |
| Notification | Yes, phone and smart watch | ✕ No |
| Share Setup Settings | Yes | ✕ No |
| Share View | Yes | ✕ No |
| Backup | Yes | ✕ No |
| Tank Calculator app | Yes, all tank shapes | ✕ No |
| Sensor data | From the app --> to the Gobius support service | ✕ No |
| Power | 9–29 V | Coin cell battery (CR2032). Pro200 also 12/24 V hardwired |
| Protection | IP66, CE/EMC | Not stated |
| Material | ABS | Not stated |
| Manual | In the app, no pappers | Not stated |
| Designed in | Sweden | USA |
Mopeka specs are summarised from Mopeka's published product information (Pro Check Universal and Pro200), November 2026. North American and European versions differ. Spot an error? Tell us and we will fix it.
Choose Mopeka if…
- You want a low-cost battery sensor and read the level in a phone app.
- The tank bottom is easy to reach for Pro Check, or the tank is under 1.2 m deep for Pro200.
- You already use Mopeka on your gas bottles.
Choose Gobius C if…
- Your tank holds black water: Mopeka says Pro Check Universal is not suitable for it.
- Your tank is deeper than 1.2 m: Gobius C reads down to 4.5 m.
- You want the reading on your existing gauge, 4–20 mA or NMEA 2000, not only in an app.
- You need alarm outputs: 2 on/off signals.
- You want the true volume for your tank's shape with the Tank Calculator.
The Gobius lineup
If the table tipped you our way

Gobius C, Basic, 0-100%
Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Gobius C, NMEA 2000, 0-100%
Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Sensor tape kit, Gobius and Gobius Pro
Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Gobius C, all analog outputs, 0-100%
Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Gobius C adapter for metal tanks

Gobius Pro with 1 sensor
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius Pro with 2 sensors
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius Pro with 3 sensors
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius 4 for grey, black & waste tanks
Complete tank monitor system for grey, black and waste tanks, version 5.0.

Gobius 4 for water/fuel- & fluid tanks
Complete tank monitor system for water, fuel and other fluids.

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks
For waste tanks

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks
For water/fuel- & fluid tanks, version 5.0.

Gobius C, analog cable, 1 m, 8 pins (male)

Gobius C, NMEA 2000 cable, 1 m, 12 pins (female)

Gobius panel cable, 1,5 m
Used to connect the panel to the Control unit.

New Control unit for Gobius 1 and 4 for grey, black & waste tanks
Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Upgrade your old Gobius to version 5.0
Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks
Control unit for water/fuel- & fluid tanks, version 5.0.
Gobius panel cable, 5 m
Used to connect the Panel to the Control unit.

Gobius panel cable, 10 m
Used to connect the panel to the Control unit.

Analog cable, 0,5 m
Complete cable

NMEA 2000 Converter
Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Gobius sensor with 1 m cable
1 meter cable lenght

Gobius panel (PIR)
Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Gobius panel for grey, black & waste tanks
For Gobius 1 and 4, grey, black & waste tanks.

Gobius panel for water/fuel- and fluid tanks
For Gobius 1 and 4, for water/fuel- and fluid tanks.

Hub for Gobius Pro sensors
Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Audible alarm, buzzer
Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.
Questions
Gobius C vs Mopeka Pro: frequently asked
Will Gobius C work with my existing gauge or chartplotter?
Yes. Gobius C Basic drives standard 0–190 Ω and 240–33 Ω gauges, the Analog version adds 4–20 mA and 0–5 V, and the NMEA 2000 version connects straight to the network. All versions also show the volume on your phone.
All Gobius C models have Bluetooth communication with Victron Cerbo GX and Roam Hub from Roam Devices.
What about metal tanks?
Every radar sensor needs a small hole with an adapter at the top of a stainless steel, steel, or aluminum tank. If you would rather drill nothing at all, Gobius Pro and Original read level points through the metal wall from the outside.
Ready to see your real volume in your tanks?
Find your nearest dealer, or contact us and we will help you choose. Installation takes about 15 minutes.