Gobius Tank Calculator · a separate app
Your gauge shows a level. This shows the volume.
Tanks are rarely perfect rectangles, which is exactly why ordinary indicators get them wrong. The Gobius Tank Calculator works out the true volume of your tank and shows litres or gallons and % in real time.
It is for the tank nobody knows the real volume of, because it was molded to fit the space rather than to be measured.
- Every tank shape
- Litres, gallons and % — live
- Works with Gobius C
The problem
You are not alone in guessing
These three sentences come up again and again when we talk to owners.
“My tank gauge is never accurate.”
“Fuel always runs out faster toward the end.”
“We overfilled the waste tank… again.”
None of it is bad luck: ordinary indicators assume half the height is half the tank.
Why it happens
Slanted, tapered, irregular — that is the norm
Tanks in RVs, boats, and campers are molded around hulls, axles, and wheel arches, so odd shapes are the rule, not the exception. The six below are all filled to the same height — and every one holds a different number of litres.

Know how far your water will take you
Rectangular
The easy case, and the one every ordinary gauge assumes: each centimetre of height is worth the same litres.
Tapered wedge
Narrow below, wide above — the classic hull tank. The top centimetres hold several times the litres of the bottom ones.
V-shaped bottom
Runs down to a keel or a point. The lowest centimetres hold almost nothing, then the litres per centimetre climb fast.
Stepped
A shelf moulded in to clear a locker or a beam. The litres per centimetre jump the moment the level passes the step.
Cylinder, lying down
A drum on its side, common under vehicles. Widest at mid-height, so the middle centimetres hold far more than the ends.
Pointed bottom? Start with about 5 cm in the tank.
How it works
Fill in small steps. Gobius does the maths.
You need a Gobius sensor on the tank and a way to add known amounts — a jug, a metered hose or a marked container.
- 01
Start with an empty tank
Drain the tank as far as it goes — on a pointed bottom, leave about 5 cm in. Open Tank Calculator, pick your sensor and choose litres or gallons.
- 02
Add a known amount
Pour in one measured step — say 10 litres — and enter the amount. The sensor reads the new level from outside the tank and stores the pair.
- 03
Repeat to the top
Keep going until the tank is full. Every step is another point on the profile.
- 04
Save the profile
The finished level-to-volume profile is stored with the tank. From then on the readout shows litres or gallons and a true percentage.
What it costs
A separate app, free for you to use
The Gobius Tank Calculator is a standalone app — not a subscription, and not bundled with the sensors.
It needs an exact level reading measured from outside the tank. Only Gobius C gives it that, so the app needs a Gobius C on the tank. Gobius Pro reports fixed alarm points rather than a continuous level, so it cannot drive the calculation.
| What you need | A Gobius C sensor on the tank — the app cannot measure without one |
|---|---|
| You see | Litres or gallons and %, live |
| Tank shapes | Box, cylinder, tapered, slanted, saddle, moulded — measured, never assumed |
| Tank depth | 200 mm to 4500 mm |
| Tanks and fluids | Water, fuel, oil and waste water. Polyethylene and fibreglass directly; metal with an adapter |
Questions
Tank Calculator — frequently asked
Is the Tank Calculator included with the sensor?
No. The Gobius Tank Calculator is a separate app, free to download at AppStore and Google Play — not a subscription, and not bundled with any sensor. It turns the level Gobius C measures into true litres or gallons for your tank’s exact shape, so it needs a Gobius C and does not work with Gobius Pro.
What do I need before I start with Tank Calculator?
A Gobius sensor on the tank, the Tank Calculator app on your phone, a tank you can empty, and a way to add known amounts.
How many fill steps do I need with Calc?
More steps, finer profile you get with Tank Calculator. A handful of even steps already beats a box assumption; ten or more gives a smooth curve.
Do I have to redo it if I move the sensor?
Yes — the profile belongs to that sensor on that tank. Move it and you run the calculation again.
Find out what your tank really holds
Every Shape. True Precision. Fit a Gobius sensor, add the Tank Calculator app, and read true volumes from then on.