Level alarms · reads from the side

Gobius Pro — when you need a level switch

Gobius Pro glues to the outside wall and tells you when the liquid passes the levels you chose. Any material, steel and aluminium included — nothing drilled, nothing inside.

It is for the tank you would rather not open at all: a steel diesel tank, or a waste tank under a berth where only the side is reachable. For all kinds of fluids. And, you can have 1, 2, 3 up to 9 Gobius Pro sensors on one tank.

  • Metal and plastic
  • 100 % external
  • Alarms at your level
3D-rendered open device with a glowing red control button on a black background

In short

Alarm points through any tank wall

Any material, any shape

Stainless <3 mm, steel <3 mm, aluminium <5 mm, polythelene <12 mm, GRP <8 mm. Each sensor reads its own spot on the wall, so tank geometry doesn’t matter — and it stays on the outside.

One sensor = one swich

Each sensor watches one fixed height and tells you whether the liquid has reached it, up and down. Several sensors give a stepped picture — quarter, half, three-quarters, full. These are alarm points, not stepless 0–100 %.

Outputs that act

It can switch things by itself — run a relay for a pump, light an alarm lamp at the helm or sound a buzzer when a level is reached.

Bluetooth app

Set up and read your levels in the Gobius app for iOS and Android. Patented and designed in Sweden.

How it works

“Knock & Listen” on the tank — and physics does the rest

Knock on a tank below the liquid line, and it sounds dull; above, it rings. Gobius Pro does that electronically — it creates a vibration in the tank wall and listens to the response. Liquid behind the wall answers differently from air behind it, which is why the wall can be in metal.

Gobius Pro sensor in front of steel, plastic and GRP tanks
Same sensor — steel, stainless, plastic, GRP
Gobius Pro sensor mounted on a tank wall next to the app showing the level
Configured & read in the app

Specifications

Gobius Pro at a glance

MeasurementPatented vibration analysis — one level point per sensor
Tank materialsStainless <3 mm · steel <3 mm · aluminium <5 mm · polyethylene <12 mm · fibre glass <8 mm
LiquidsFresh water, black & grey water, diesel, petrol, oil, all kinds of fluids
MountingGlued with the 3M tape to the outside of the tank wall — nothing inside. If you are installing multiple sensors, this can be done on different sides.
ConnectivityBluetooth LE · Gobius app (iOS/Android)
Outputs2 digital outputs, On/off signals, under and above the sensor
FuseRequired, user-supplied: fast acting (F), 500 mA, 250 V
InstallationAbout 15 minutes per sensor

Protect it with a fuse

To prevent damage to the sensor and potential hazards to personnel, the sensor and all connected external equipment (gauges, lamps, etc.) must be protected by a user-supplied fuse compliant with the following specification:

• Type: Fast acting (F)
• Current rating: 500 mA
• Voltage rating: 250 V

Installation

Glue, pair, done

About 15 minutes per sensor, and not a single hole.

  1. 01

    Pick the level points

    Decide the heights you want to be told about — one sensor at 75 % on a waste holding tank, or 10% for a fuel tank.

  2. 02

    Glue the sensors on

    Clean the spot, press the sensor to the tank wall. No tools, no hole.

  3. 03

    Calibrate in the app

    The app walks you through the installation. Maintenance-free from there.

Step-by-step with pictures: installation guides.

Security

Only you decide who reads your tank

A Gobius sensor talks Bluetooth, so it is fair to ask who else can connect to it. The answer is up to you, in a few taps in the app.

  1. 01

    Close it to your phone

    Set the sensor to Closed and it only talks to the phone you paired it with. Set it to Open when anyone with the Gobius app may read it.

  2. 02

    Share as much as you want

    Share everything with crew or family, or let someone only view the level with a security code.

  3. 03

    Switch Bluetooth off

    When you don't need the app, turn the sensor's Bluetooth off and there is nothing left to connect to. A Gobius C with NMEA 2000 or analog outputs keeps sending the level to your screens and gauges.

Buy

One sensor, or as many levels as you want

Each sensor watches one level. Fit a single one where it matters — “nearly full” on a waste tank is often all anyone uses — or run several up the tank wall for a stepped picture: quarter, half, three-quarters, full. Start with one and add sensors later; you don't have to decide everything up front.

Gobius C, Basic, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Details

Gobius C, NMEA 2000, 0-100%

Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Details

Sensor tape kit, Gobius and Gobius Pro

Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Details

Gobius C, all analog outputs, 0-100%

Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Details

Gobius Pro with 1 sensor

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 2 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius Pro with 3 sensors

Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Details

Gobius 4 for grey, black & waste tanks

Complete tank monitor system for grey, black and waste tanks, version 5.0.

Details

Gobius 4 for water/fuel- & fluid tanks

Complete tank monitor system for water, fuel and other fluids.

Details

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks

For waste tanks

Details

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks

For water/fuel- & fluid tanks, version 5.0.

Details

Gobius panel cable, 1,5 m

Used to connect the panel to the Control unit.

Details

New Control unit for Gobius 1 and 4 for grey, black & waste tanks

Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Details

Upgrade your old Gobius to version 5.0

Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

Details

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks

Control unit for water/fuel- & fluid tanks, version 5.0.

Details

NMEA 2000 Converter

Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Details

Gobius panel (PIR)

Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Details

Gobius panel for grey, black & waste tanks

For Gobius 1 and 4, grey, black & waste tanks.

Details

Gobius panel for water/fuel- and fluid tanks

For Gobius 1 and 4, for water/fuel- and fluid tanks.

Details

Hub for Gobius Pro sensors

Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Details

Audible alarm, buzzer

Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.

Details

Questions

Gobius Pro — frequently asked

Does Gobius Pro show a percentage?

No — this is the limitation to understand before you buy. Each sensor reports one level: the liquid has reached this line, or it hasn't. Several sensors give a stepped picture (quarter, half, three-quarters, full). For stepless readout, see Gobius C or Pro?

Is one Gobius Pro enough?

For many holding tanks, a single “almost full” sensor is all anyone needs. Add sensors for more steps, or spread them across several tanks. Each is independent and the app shows them together.

Can it switch a pump or an alarm?

Yes. One digital output and optional relay modules (12/110/230 V) — start a transfer pump at a set level, light a lamp at the helm, or trigger an external alarm.

Do Gobius C and Pro need any maintenance?

Nothing goes inside the tank, so there is nothing to foul, jam or corrode. Once calibrated there are no moving parts and nothing to clean.

Can someone else connect to my Gobius sensor?

Only if you let them. In the Gobius app you can set the sensor to Closed, so it only talks to your own phone, or to Open when anyone with the app may read it. You can share full access, or let others only view the level with a security code. And when you don't need the app, you can switch the sensor's Bluetooth off.

The tank you thought couldn't be measured

Gobius Pro retrofits to the tanks you already have — about 15 minutes per sensor, and not a single hole.