Gobius C · radar tank sensor
Gobius C — you get exact volume
Gobius C gives you the exact volume in your tank instantly, and with the Tank Calculator the true volume — whatever tank shape you have. The micro radar sits on top and reads the liquid surface through the tank wall: on plastic and fibreglass, nothing goes inside and nothing touches the fluid.
It is for the tank where you want an accurate volume presentation — how much fresh water is actually left, how much fuel before the next leg.
- Micro radar · 2 mm resolution
- Measured from outside the tank
- App in 10 languages
How it works
Radar sensor from the top, through the wall
Almost no tank is a neat box; they are built to fit the space they live in, and that is where ordinary indicators start guessing. Gobius C measures a real distance down to the surface, so an odd tank is no harder than a rectangular one.
- 01
It sits on top of the tank
A small unit on the tank top, with a 1 m cable to 12–24 V DC. Nothing to lower in, nothing to seal, nothing to clean later.
- 02
The radar reads the surface
A micro radar pulse passes straight through polyethylene or fibreglass and times the reflection off the fluid. That distance is the level: 2 mm resolution, stepless, 0–100 %.
- 03
You read it where you want it
On your phone over Bluetooth in the Gobius app, on an NMEA 2000 plotter, or on the analog gauge already in the panel — depending on the variant.
- Tapered
- Slanted
- V-shaped
- Stepped
- Saddle & moulded
- Baffled

For true litres and gallons as well as a true percentage, profile the tank once with the Gobius Tank Calculator — a separate app that needs a Gobius C.
Which tanks it suits
Material and depth
Radar reads straight through polyethylene and fiberglass. What each material needs is in the table; the placement rules and clearances are set out under limits & specifications.
| Polyethylene & fiberglass | Fully external up to a 12 mm polyethylene or 8 mm fibreglass wall — the radar reads through it, nothing drilled. |
|---|---|
| Stainless steel, steel & aluminium | A small hole in the tank top, fitted with the adapter. The measurement is then just as accurate. |
| Tank depth | 200 mm to 4500 mm |
| Tank shape | Any — the shape makes no difference |
| Fluids | Water · diesel, petrol and oil · black, grey and waste water |
Waste tanks, without going in
Nothing enters the effluent — so there is nothing to foul, and nothing to service. Metal tank you will not open? See Gobius C or Pro.
Three variants
Choose your Gobius C
Same radar, same 2 mm resolution, same app in all three. What differs is where the volume ends up.

Gobius C, Basic, 0-100%
Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, 2 m cable, Quick Guide and a 3M cleaning wipe. Handles voltage of 12-24 Volts.…

Gobius C, NMEA 2000, 0-100%
Plug and play installation. Can be connected direct to a NMEA 2000 networks. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, NMEA 2000 cable, 3M cleaning…

Sensor tape kit, Gobius and Gobius Pro
Useful for attaching Gobius and Gobius Pro sensors on the tank. Can't be used for Gobius C sensors.

Gobius C, all analog outputs, 0-100%
Plug and play installation. No disassembly of the tank is needed. Measures from the top, never risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe. Handles voltage of 12-24 Volts. The sensor is mounted in…

Gobius C adapter for metal tanks

Gobius Pro with 1 sensor
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius Pro with 2 sensors
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius Pro with 3 sensors
Measuring from the outside the tank, nothing on the inside. Bluetooth and App for your phone included.

Gobius 4 for grey, black & waste tanks
Complete tank monitor system for grey, black and waste tanks, version 5.0.

Gobius 4 for water/fuel- & fluid tanks
Complete tank monitor system for water, fuel and other fluids.

Upgrade Gobius 1 to Gobius 4, grey, black & waste tanks
For waste tanks

Upgrade Gobius 1 to Gobius 4 for water/fuel- & fluid tanks
For water/fuel- & fluid tanks, version 5.0.

Gobius C, analog cable, 1 m, 8 pins (male)

Gobius C, NMEA 2000 cable, 1 m, 12 pins (female)

Gobius panel cable, 1,5 m
Used to connect the panel to the Control unit.

New Control unit for Gobius 1 and 4 for grey, black & waste tanks
Control unit for Gobius 1 and Gobius 4, Waste tanks, version 5.0.

Upgrade your old Gobius to version 5.0
Step up to the version 5.0 of Gobius 4, Waste or Water/Fuel/Fluid.

New Control unit for Gobius 1 and 4 for water/fuel- & fluid tanks
Control unit for water/fuel- & fluid tanks, version 5.0.
Gobius panel cable, 5 m
Used to connect the Panel to the Control unit.

Gobius panel cable, 10 m
Used to connect the panel to the Control unit.

Analog cable, 0,5 m
Complete cable

NMEA 2000 Converter
Converts tank data from Gobius and Gobius Pro to NMEA 2000 networks.

Gobius sensor with 1 m cable
1 meter cable lenght

Gobius panel (PIR)
Smart overfill alarm panel with built-in motion sensor (PIR). Starts Gobius when you visit the toilet and switches off automatically after 60 seconds. Alarms when the waste tank is full. Only 12 Volt.

Gobius panel for grey, black & waste tanks
For Gobius 1 and 4, grey, black & waste tanks.

Gobius panel for water/fuel- and fluid tanks
For Gobius 1 and 4, for water/fuel- and fluid tanks.

Hub for Gobius Pro sensors
Out signals: 10-180 Ohm and 240-33 Ohm. Read more about the Hub at Gobiuspro.com, Documentation.

Audible alarm, buzzer
Suitable for all Gobius products, (version 3.0, 4.0 and 5.0) and also for Gobius Pro sensors.
Cables, adapters and the rest of the range are in the shop.


Designed in Sweden.
Security
Only you decide who reads your tank
A Gobius sensor talks Bluetooth, so it is fair to ask who else can connect to it. The answer is up to you, in a few taps in the app.
- 01
Close it to your phone
Set the sensor to Closed and it only talks to the phone you paired it with. Set it to Open when anyone with the Gobius app may read it.
- 02
Share as much as you want
Share everything with crew or family, or let someone only view the level with a security code.
- 03
Switch Bluetooth off
When you don't need the app, turn the sensor's Bluetooth off and there is nothing left to connect to. A Gobius C with NMEA 2000 or analog outputs keeps sending the level to your screens and gauges.
Specifications
Gobius C in full
| Feature | Basic | Analog Outputs | NMEA 2000 |
|---|---|---|---|
| Choose it when | You want the volume on your phone, and on the analog gauge already in the panel | You also need to feed other instruments or a control system | Your boat has an NMEA 2000 network and you want volumes at the monitor |
| Volume goes to | Analog gauge, 0-190/240-33 Ohm · app | Analog gauge, 0-190/240-33 Ohm, 4–20 mA and 0–5 V · app | NMEA 2000 network · app |
| 2 alarm outputs | Yes | Yes | ✕ No |
| Measurement | Micro radar · 2 mm resolution · stepless 0–100 % |
|---|---|
| Tank depth | 200–4500 mm |
| App | Gobius app over Bluetooth · iOS and Android · 10 languages · Victron Cerbo GX and Ekrano GX |
| Tank Calculator | Separate app |
| Power | 12–24 V DC (min 9 V, max 28 V) · 25 mA |
| Fuse | Required, user-supplied: fast acting (F), 500 mA, 250 V |
| Protection · approvals | IP 66 · CE / EMC |
Protect it with a fuse
To prevent damage to the sensor and potential hazards to personnel, the sensor and all connected external equipment (gauges, lamps, etc.) must be protected by a user-supplied fuse compliant with the following specification:
• Type: Fast acting (F)
• Current rating: 500 mA
• Voltage rating: 250 V
Questions
Gobius C — frequently asked
My tank is an odd shape. Will the volume really be right?
Yes. The radar measures the actual distance to the surface with 2 mm resolution, so a tapered, slanted, or molded tank is no harder to model than a box in Tank Calculator.
Is it hard to install?
No. On a polyethylene or fibreglass tank Gobius C is plug and play: fit it on top, connect 12–24 V DC and let the app guide the setup over Bluetooth. That covers a polyethylene wall up to 12 mm and fibreglass up to 8 mm. Stainless steel and aluminium tanks, and thicker fibre glass, you need our adapter — or can be read from the side with Gobius Pro. Where to put the sensor is set out under limits & specifications.
Where can I see the volume?
In the Gobius app on iOS and Android, in ten languages, for both C and Pro sensors. Gobius C can also show on a Victron Cerbo GX or Ekrano GX, Roam Hub from Roam Devices over Bluetooth and, depending on the variant, go onto an NMEA 2000 network or drive ordinary analog gauges — see integrations.
Can someone else connect to my Gobius sensor?
Only if you let them. In the Gobius app you can set the sensor to Closed, so it only talks to your own phone, or to Open when anyone with the app may read it. You can share full access, or let others only view the level with a security code. And when you don't need the app, you can switch the sensor's Bluetooth off.
Every Tank Shape. True Precision.
Fit one and read the true level in your tank from then on.