Free tool
Tank volume calculator
Find out how many litres or US gallons your tank holds, and how much is in it right now. Choose the shape, enter the measurements in centimetres or inches, and see the formula behind the answer.
Calculate your tank’s volume
Enter the measurements to see the volume.
Gobius C shows this for you, live.See Gobius C
How to measure your tank
The calculator assumes an ideal shape. That is close enough for most box and cylinder tanks. A tank moulded to fit a hull or a wheel arch is better measured with the Tank Calculator app.
- 01
Choose the closest shape
Rectangular for box tanks, upright cylinder for drums and boilers, cylinder on its side for fuel and heating-oil tanks, capsule for cylinders with rounded ends, and wedge for tanks that are narrower at the bottom, like many hull tanks. For a capsule, L is the straight middle section, without the rounded ends.
- 02
Measure the inside
Use the inside dimensions where you can. If you can only reach the outside, subtract the wall thickness twice from each measurement.
- 03
Add the liquid height
Measure from the inside bottom of the tank up to the surface, for example with a dipstick in a water or fuel tank. Leave it empty to get the total capacity only.
Questions
Tank volume — asked & answered
How do I calculate the volume of a rectangular tank?
Multiply the inside length, width and height: V = L × W × H. In centimetres the answer is in cubic centimetres; divide by 1,000 for litres. A tank of 100 × 50 × 40 cm holds 200,000 cm³, which is 200 litres or about 52.8 US gallons.
How do I calculate the volume of a cylindrical tank?
Use V = π × r² × length, where r is half the diameter. For an upright cylinder, the contents are simply π × r² × the liquid height.
A cylinder lying on its side is harder, because the width of the liquid surface changes with the level. The calculator works out the area of the circular segment below the surface and multiplies it by the length.
Why is half the height not half the tank?
Only in a tank with straight, vertical sides is every centimetre of height worth the same number of litres. In a cylinder on its side, the bottom quarter of the height holds only about 20 % of the volume, and in a wedge-shaped hull tank the bottom centimetres hold far less than the top ones. That is why a gauge that reads height as percent can be well off.
Should I use inside or outside measurements?
Inside, if you can. The calculator uses exactly the dimensions you enter, so measuring the outside of a tank adds the wall thickness twice to every dimension. If you can only measure the outside, subtract twice the wall thickness from each measurement.
How do I convert tank volume to litres or gallons?
1 litre is 1,000 cm³, and 1 US gallon is 231 cubic inches, or about 3.785 litres. The calculator shows both, whichever unit you measure in. An imperial (UK) gallon is larger: about 4.546 litres.
How accurate is the tank volume calculator?
As accurate as your measurements and the shape you choose. Rounded corners, baffles, fittings and bulging walls mean a real tank can hold a little less than the ideal shape.
For a tank moulded around a hull or a wheel arch, the Gobius Tank Calculator app finds the true volume by learning the fill profile as you fill the tank in steps.
Can a tank gauge show the volume for me automatically?
Yes. Gobius C reads the liquid surface with micro radar from the top of the tank, with 2 mm accuracy, and shows the contents in litres, gallons or % in the app, on NMEA 2000 or on the gauge you already have. Add the Tank Calculator app and it shows the true volume for any tank shape.
Stop measuring. See it live.
Gobius C reads the level from outside the tank and shows litres, gallons or % in the app. With the Tank Calculator app, for any tank shape.