|
|
 |
|
|
Email this page to a friend
|
|
Gobius level indicator for water, oil, diesel, gasoline and waste
Gobius is the first and only level indicator in the world that can measure the contents in tanks made of any material, such as plastic, stainless steel, steel, aluminum and fibre glass, from the outside. Since it measures from the outside cleaning the tank or drilling holes is unnecessary.
Watch our instruction videos here!
Installed and ready to use in 30 minutes!
- Suitable for all tanks
- Waste
- Water
- Diesel
- Gasoline
- and all other fluids
- and for all tank materials
- Stainless steel, 1-3 mm
- Steel, 1-3 mm
- Aluminum, 2-5 mm
- Polyethelen, 2-10 mm
- Fibre Glass, 4-8 mm
- Avoids direct contact with the contents
- Can be retro-fitted to tanks of any shape or size of a tank
- Calibrates automatically
- Can be installed without extra service or cleaning of inside of the tank
- Can be connected to displays from Wema, VDO, Teleflex, Faria, Phillippi and other analouge instruments
- Supports 10-180 Ohm, 240 - 33 Ohm and 4 20 mA
- Supports NMEA 2000 with an analouge adapter
- Extremely low electricity consumption, less than 40 mA (supports 12 -24 Volts)
Smart Patented Technology
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit. The control unit then starts to calculate in order to give an exact estimate of whether the fluid level has passed the sensor or not.
Easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds; all you need to do is to press a button.
Extremely low electricity consumption, less than 40 mA
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft’s 12-24 Volts battery.
Our distributors and dealers
Along with our distributors and dealers are we marketing Gobius and SeeLevel products in 19 countries, including most countries in Europe, USA, Canada and Australia. All Gobius products from FM Marin are sold through these Gobius partners.
Read more about our distributors here >> |
Gobius is made for industry use
for Waste Holding Tanks
and for Water, Diesel and Gasoline Tanks
|
|
SeeLeveL products for plastic tanks
Garnet Instruments in USA has developed state of the art designs for liquid level gauging and monitoring of recreational vehicle (RV) holding tanks. The systems come with a variety of capabilities depending on the model. Some of the capabilities include level measurement, temperature display, battery voltage, as well as pump and heater switches and pilot out indicators.
Each system comes with Garnet"s proprietary externally mounted tank sensors for fresh water, grey water, and black water tanks.
With nothing inside the tank all the usual problems of corrosion and clogging are eliminated. Individual sensors can measure tanks up to 430 mm tall. For taller tanks, up to 840 mm in height, two sensors can be stacked. The senders can be cut of to match the height of tank. Maximum tank wall thickness is 9 mm.
All SeeLevel products require 12 volts from the boat battery and the systems will function from 11 volts to 16 volts. Current drain is less than 200mA. SeeLeveL products are delivered with installation instructions, free technical support and warranty statement (2 years) in English.
SeeLeveL 707, multi tank monitor system
This level gauge has an easy to read LED display. Display fresh, gray, or black tank levels at the press of a button. 9 segmented display gives accuracy to 1/8 (12.5%) of a tank. Orange and red indicators are used for low and empty level warnings for the fresh water tank. Orange and red indicators are used for high and full level warnings for the gray and black water tanks. 3 sender boards are included.
Art No 970206, SeeLeveL 707
SeeLeveL 709, multi tank monitor system
This system provides an outstanding balance between low cost and full features. Instead of single points that give you only a close appr. of how full your tanks are this system offers a continuous level and shows an actual number, in percent of full.
Measures tanks up to 300 mm tall with a single sender or 600 mm tall with dual senders. 3 sender boards are included.
Art No 970213, SeeLeveL 709
SeeLeveL 713, multi tank monitor system
No buttons to push! The level of each tank, plus the outside temperature, is shown individually. 713 provides accurate tank level information in percentage of full. Measures tanks up to 430 mm tall with a single sender or 840 mm tall with dual senders. 3 sender boards are included.
Art No 970220, SeeLeveL 713
Dear customer, we have distributors in most of all countries in Europe, in USA, in Canada and in Australia.
All Gobius products from FM Marin are sold through these Gobius partners. |
|
|
|
|
|
